HVOF Equipment

Jet Kote® II Nova-A | Jet Kote® II Nova-D | Jet Kote® III | Comparison of Jet Kote® Systems



The Jet Kote® II Nova systems were designed with operator convenience and efficiency in mind. They combine the high quality coating capabilities Jet Kote® torches are known for, with improved control console features for consistent, repeatable performance.

The unique design of the Jet Kote® Nova II systems precisely controls the parameters of the HVOF process. Particle velocity, oxides, and temperature are tightly controlled, resulting in extremely dense coatings with typical porosities of

Our Jet Kote® II Nova systems are capable of spraying a broad range of materials at up to 20 lb. /hour. Deposit efficiencies up to 70% are possible, resulting in deposit rates of up to 0.200 in/ft2/hr.

The typical Nova system consists of a control console, Model JK® 3000 torch, heat exchanger and powder feeder. The system is designed to provide optimum performance and the highest quality coatings available. The system is available in both an analogue and digital form.


Jet Kote® II Nova-A


Analog display of manifold and torch pressures as well as gas flow rates (SCFH) using critical orifice flow meters for all gases
Gas flow is controlled using precision needle valves with gas pressure regulators in the console to increase accuracy and repeatability of gas flow rates
Gas saver mode (partial flow) for economical operation and improved cycle times while operator checks or changes parts being coated
Digital display of water temperature and flow rates
Digital timers for “flame time” and “powder time”
Optional multi-fuel capability is available
Optional remote pendant available
Remote ignition and optional remote powder valve can be used for complete separation of operator and the spray environment
Two auxiliary interfaces are provided for optional connection with safety switches on the spray booth

Specifications for single fuel console:

Dimensions:

34” Hx 44.5” L x 28.25” W

Weight:

320 lbs. (145 kg)

Electrical:
110 VAC, 15 amps, 1 phase, 60 Hz or 220 VAC, 8 amps, 1 phase, 50 Hz


Jet Kote® II Nova-D


This thermal spray system consists of the same features as the Jet Kote® II Nova-A system with the addition of

Digital display of manifold and torch pressures
Gas flow rates using thermal mass flow meters for all gases

Specifications:

Dimensions:

34”H x 44.5” L x 28.25” W (86.4 cm x 113 cm x 71.8 cm)

Weight:

356 lbs. (162 kgs)

Electrical:
110 VAC, 15 amps, 1 phase, 60 Hz or 220 VAC, 8 amps, 1 phase, 50 Hz


Jet Kote® III



The Jet Kote® III was designed with operator convenience and efficiency in mind. It combines the high quality coatings Jet Kote® is known for with consistent, repeatable performance. The Jet Kote® III consists of a control console, Model JK® 3000 torch, heat exchanger, and powder feeder. All elements of the system are designed to work together to provide optimum performance.

Capable of spraying materials up to 20 lbs/hr
Deposit efficiencies up to 70%
Designed and built in accordance with CE standards
Latest mass flow closed loop technology
Gas saver mode i.e. partial flow
Online storage of spray programs
Sharp, graphical color displays of all process parameters
Advanced monitoring of all process parameters with adjustable min/max values which are password protected
Remote operating pendant
Safety alarms
Interface to data acquisition systems (optional)
The ability to use multi fuel sources including hydrogen, methane, propylene, propane, ethylene (optional)


Jet Kote® II Nova-D/FC



This thermal spray system consists of the same features as the Jet Kote® II Nova-D system with the addition of

Gas flow rates using closed loop thermal mass flow meters for all gases

Specifications:

Dimensions:

34” H x 44.5” L x 28.25” W (86.4 cm X 113 cm X 71.8 cm)

Weight:

356 lbs (162 kg)

Electrical:

110 VAC, 15 amps, 1 phase, 60 Hz or 220 VAC, 8 amps, 1 phase, 50 Hz